Utilization of Heat Compressor in The Air Conditioning of The Ahu Direct Expantion System for Class 100,000 Cleanroom Rooms
DOI:
https://doi.org/10.38035/gijes.v3i4.692Keywords:
Heat Recovery, Air Conditioning, Humidity, Hot GasAbstract
Currently, the demand for cleanrooms is quite high. With the growth of the food industry, medical equipment, and hospitals, the need for these spaces has become increasingly important. Cleanroom classifications are regulated in various literature, such as ISO, SNI, NFPA, and others. In ISO 14644-1, cleanroom classification is divided into several categories: Class 100,000 (ISO 8), Class 10,000 (ISO 7), Class 1,000 (ISO 6), and Class 100 (ISO 5). The differences between these classifications lie in temperature, humidity, air changes per hour, particle quality, and airflow distribution.To maintain humidity, electric heaters are generally used as equipment. The energy requirement is quite high, and in an AHU system, this device creates an additional heat load because it generates the full sensible load. In this study, the use of a heat compressor or heat recovery unit could be an option for maintaining humidity in a room conditioned by an HVAC system. The flow rate of the high-temperature, high-pressure refrigerant will be regulated using a solenoid valve triggered by a humidity sensor. A defrost mechanism will be implemented within the heat recovery coil to prevent freezing within the system. The results of this study state that the energy required for a cleanroom AHU system that uses heat recovery for air humidity conditioning is more efficient than using an electric heater.
References
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). (2020). ASHRAE Handbook—HVAC Applications. Atlanta, GA: ASHRAE.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). (2020). ASHRAE Handbook—HVAC Systems and Equipment. Atlanta, GA: ASHRAE.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). (2017). ANSI/ASHRAE/ASHE Standard 170: Ventilation of Health Care Facilities. Atlanta, GA: ASHRAE.
Badan Pengawas Obat dan Makanan Republik Indonesia. (2018). Pedoman Cara Pembuatan Obat yang Baik (CPOB). Jakarta: BPOM RI.
Carrier Corporation. (2015). Carrier System Design Manual – Air Conditioning. Syracuse, NY: Carrier Corporation.
Dossat, R. J., & Horan, T. J. (2002). Principles of Refrigeration (5th ed.). New Jersey: Prentice Hall.
Eicker U. Low Energy Cooling for Sustainable Buildings. Wiley; 2009.
Gaugler, Richard., “Heat Transfer Divices”, U.S. Patent Office, Ohio, 4,2350348, 1994
International Organization for Standardization. (2015). ISO 14644-1: Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration. Geneva: ISO.
International Organization for Standardization. (2015). ISO 14644-2: Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance. Geneva: ISO.
Janargin, E Ronald, (2010), Heat Recovery from Air Conditioning Units, Fact Sheet EES-26, University of Florida
Komisi Akreditasi Rumah Sakit (KARS). (2019). Standar Nasional Akreditasi Rumah Sakit (SNARS). Jakarta: KARS.
Dossat, R. J., & Horan, T. J. (2002). Principles of Refrigeration (5th ed.). New Jersey: Prentice Hall.
Stoecker, W. F., & Jones, J. W. (1982). Refrigeration and Air Conditioning. New York: McGraw-Hill.
Tildsley, S., dan Courtman, D., (2002), Plumbing engineering services: Design Guide, the Institute of Plumbing, United Kingdom
Trane. (2016). Trane Air Conditioning Clinics: Dehumidification and Heat Recovery. La Crosse, WI: Trane.
Xu, G., X. Zhang, and S. Deng, (2006), Experimental study on the operating characteristics of a novel low-concentrating solar photovoltaic/thermal integrated heat pump water heating system. Applied Thermal Engineering. In Press, Corrected Proof
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Agung Laksono, Denny Prumanto, Amri Simbolon, Komarudin Komarudin

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright:
Authors who publish their manuscripts in this journal agree to the following conditions:
- Copyright in each article belongs to the author.
- The author acknowledges that Greenation International Journal of Engineering Science (GIJES) has the right to be the first to publish under a Creative Commons Attribution 4.0 International license (Attribution 4.0 International CC BY 4.0).
- Authors can submit articles separately, arrange the distribution of non-exclusive manuscripts that have been published in this journal to other versions (for example, sent to the author's institutional repository, publication in books, etc.), acknowledging that the manuscript has been published for the first time in GIJES.























