Analysis of Molding Machine Efficiency Using the Overall Equipment Effectiveness (OEE) Method and Six Big Losses to Reduce Product Defects at PT. XYZ

Authors

  • Trison Darius Department of Industrial Engineering, Faculty of Engineering, University of Riau Island, Jl. Pahlawan No. 99, Bukit Tempayan, Batu Aji, Batam, Riau Islands, 29425, Indonesia
  • Hery Irwan Department of Industrial Engineering, Faculty of Engineering, University of Riau Island, Jl. Pahlawan No. 99, Bukit Tempayan, Batu Aji, Batam, Riau Islands, 29425, Indonesia

DOI:

https://doi.org/10.38035/gijes.v4i3.1293

Keywords:

Fishbone Diagram, molding machine, machine efficiency, OEE, Six Big Losses

Abstract

This study aims to evaluate the performance efficiency of molding machines using the Overall Equipment Effectiveness (OEE) method and to identify the main causes of production losses through the Six Big Losses approach and a Fishbone Diagram. The data used consist of machine operational records from January to June 2025. The findings show that the average OEE score is 63.08%, below the company’s standard of 75%. The Six Big Losses analysis indicates that the largest losses are attributed to equipment failures, accounting for 63.45%, followed by reduced speed at 12.70% and idling and minor stoppages at 10.79%. In addition, the Fishbone analysis indicates that the main causes of low OEE are related to machine and personnel factors, including hydraulic system malfunctions, machine overheating, and extended setup times resulting from limitations in operator skills. The proposed improvements focus on implementing preventive maintenance, improving operator skills, and standardizing work procedures. Estimates suggest that these improvements could potentially increase the OEE value to 68.6%. The findings are expected to serve as a basis for improving machine effectiveness and production process efficiency.

References

Adak, B., Chatterjee, U., & Joshi, M. (2025). Rubber-Based Sustainable Textiles and Potential Industrial Applications. Textiles, 5(2), 1–38. https://doi.org/10.3390/textiles5020017

Arfelli, A. I., & Hapsari, C. A. P. H. (2023). Sigma DMAIC in Reducing Rejects in the Assy Unit Process at PT XYZ. Industrial Engineering Online Journal. https://ejournal3.undip.ac.id/index.php/ieoj/index

Hardt, F., Kotyrba, M., Volna, E., & Jarusek, R. (2021). Innovative approach for preventive maintenance of production equipment based on a modified TPM methodology for Industry 4.0. Applied Sciences, 11(15), 6953.

Iskandar, S., & Padmakusumah, R. R. (2025). Analysis of TPM (Total Productive Maintenance) Implementation Progress and Its Projected Benefits for Productivity Improvement (A Case Study of Company X). Jurnal Impresi Indonesia, 4(7), 2532–2547. https://doi.org/10.58344/jii.v4i7.6864

Ng, C., Enrique, M., & Korner, H. (2020). Overall Equipment Effectiveness: Systematic Literature Review and Overview of Different Approaches. Applied Sciences, 1988. www.mdpi.com/journal/applsci

Novera, D. A., & Thomas, P. (2020). The Role of Self-Control in Mediating the Effects of Achievement Motivation, Perfectionism, and Economic Difficulties on Academic Procrastination (A Case Study of Students Working on Their Undergraduate Thesis at the Faculty of Economics, UNNES). Economic Education Analysis Journal, 9(3), 831–843.

Nur, M., & Haris, H. (2019). Proposed Improvements to Machine Effectiveness Through TPM Implementation Analysis Using the OEE and Six Big Losses Methods at PT. P&P Bangkinang. Industrial Engineering Journal, 8(1), 57–67. https://doi.org/10.53912/iejm.v8i1.382

Petter, S., Delone, W., & McLean, E. R. (2013). Information systems success: The quest for the independent variables. Journal of Management Information Systems, 29(4), 7–62. https://doi.org/10.2753/MIS0742-1222290401

Priyanto, D., & Suhada, R. (2020). Analysis of Overall Equipment Effectiveness (OEE) Measurement on a Rice Milling Unit (RMU) Machine at PT. FSTJ. Jurnal Penelitian dan Aplikasi Sistem dan Teknik Industri (PASTI), XVII(2), 209–222.

Rahul, J. S. K. (2013). Eradication of Productivity-Related Problems Through Lean Principles in an Integrated Manufacturing Environment. Lean Thinking, 4(1), 71–88.

Silitonga, M. P. R., Salwaellya, H., Yudisha, N., & Putera, H. R. (2025). A Study of Bignose 9 Machine Efficiency Through OEE and Six Big Losses Analysis in the Cosmetics Sector. Blend Sains Jurnal Teknik, 4(2), 327–337. https://doi.org/10.56211/blendsains.v4i2.842

Supriyati, S., & Wiyatno, T. N. (2025). Improving press machine efficiency using a TPM approach and Six Big Losses analysis. Journal Industrial Services, 10(2), 347. https://doi.org/10.62870/jiss.v10i2.28344

Tammya, E., & Herwanto, D. (2021). Analysis of Debarker Machine Effectiveness Using the Overall Equipment Effectiveness (OEE) Method at PT. XYZ, Kuningan, West Java. SITEKIN: Jurnal Sains, Teknologi dan Industri, 16(2), 36–47.

Ummah, N. H., & Dahda, S. S. (2022). Analysis of the Performance Effectiveness of Manual and Automatic Cutting Machines Using the Overall Equipment Effectiveness (OEE) Method at PT. XYZ. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 8(2), 345. https://doi.org/10.24014/jti.v8i2.19765

Yazdi, P. G., Azizi, A., & Hashemipour, M. (2018). An empirical investigation of the relationship between overall equipment efficiency (OEE) and manufacturing sustainability in Industry 4.0 using a time-study approach. Sustainability (Switzerland), 10(9). https://doi.org/10.3390/su10093031

Downloads

Published

2026-11-16

How to Cite

Darius, T., & Irwan, H. (2026). Analysis of Molding Machine Efficiency Using the Overall Equipment Effectiveness (OEE) Method and Six Big Losses to Reduce Product Defects at PT. XYZ. Greenation International Journal of Engineering Science, 4(3), 342–352. https://doi.org/10.38035/gijes.v4i3.1293

Most read articles by the same author(s)