Design and Development of a Portable Beverage Cooling System Using a Heatsink and Wind Tunnel Fan Based on the Peltier Effect

Authors

  • Muhammad Adinda Hadinur Universitas Dian Nusantara, Jakarta, Indonesia
  • Komarudin Komarudin Universitas Dian Nusantara, Jakarta, Indonesia

DOI:

https://doi.org/10.38035/gijes.v3i4.714

Keywords:

system cooler portable , Peltier effect , heatsink, wind tunnel fan , displacement hot

Abstract

Development system cooler portable become important along increasing need cooling practical without use refrigerant and compressor . System cooler based The Peltier effect offers solution friendly environment and size compact , but performance is greatly influenced by ability disposal hot on the side hot module . Research This aim design and build system cooler drink portable based Peltier module with optimization mechanics using a heatsink and wind tunnel fan. Research methods covering design mechanics , manufacturing prototype , as well as testing performance thermal through measurement temperature side hot , side cold , temperature drinks and consumption Power electricity . The test results show that the system is able to achieve a minimum cold side temperature of 12 °C, a cooling chamber temperature of 16 °C, and reduce the beverage temperature by up to 5 °C within a 30-minute test duration. The use of a heatsink combined with a wind tunnel fan has been shown to increase the effectiveness of heat dissipation, thereby maintaining the stability of the Peltier module's performance. This system has the potential to be developed as an alternative small-scale portable cooler with low power consumption.

References

ASHRAE. (2017). ASHRAE handbook: Fundamentals . American Society of Heating, Refrigerating and Air-Conditioning Engineers.

Bhowmik, H., & Dutta, P. (2022). Thermal performance enhancement of thermoelectric cooler using optimized heat sink and forced convection. International Journal of Heat and Mass Transfer, 183 , 122153. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122153

Çengel , Y.A., & Ghajar, A.J. (2020). Heat and mass transfer: Fundamentals and applications (6th ed.). McGraw-Hill Education.

Mahan, G. D. (2018). Thermoelectric materials: New directions and approaches . Springer.

Rahman, MM (2021). Performance analysis of thermoelectric cooling systems for portable applications. Journal of Energy Storage, 35 , 102284

Rowe, D. M. (2018). Thermoelectrics handbook: Macro to nano . CRC Press.

Shires, G.L. (2011). Applied heat transfer . CRC Press.

Downloads

Published

2026-02-13

How to Cite

Hadinur, M. A., & Komarudin, K. (2026). Design and Development of a Portable Beverage Cooling System Using a Heatsink and Wind Tunnel Fan Based on the Peltier Effect . Greenation International Journal of Engineering Science, 3(4), 211–216. https://doi.org/10.38035/gijes.v3i4.714

Issue

Vol. 3 No. 4 (2025): (GIJES) Greenation International Journal of Engineering Science (December 2025 - February 2026)

Section

Articles

License

Copyright (c) 2026 Muhammad Adinda Hadinur, Komarudin Komarudin

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Copyright:

Authors who publish their manuscripts in this journal agree to the following conditions:

  1. Copyright in each article belongs to the author.
  2. The author acknowledges that Greenation International Journal of Engineering Science (GIJES) has the right to be the first to publish under a Creative Commons Attribution 4.0 International license (Attribution 4.0 International CC BY 4.0).
  3. Authors can submit articles separately, arrange the distribution of non-exclusive manuscripts that have been published in this journal to other versions (for example, sent to the author's institutional repository, publication in books, etc.), acknowledging that the manuscript has been published for the first time in GIJES.